-
Full HD 1920 x 1080 resolution
Versatile connectivity: VGA, HDMI, Composite (BNC) inputs
Composite (BNC) passive loop-through output port
Quick Image settings: CCTV Mode, Gamma Selection, Black-level Adjustment, Contrast Enhancer
Designed and developed for continuous 24/7 operation
3-SIDED BEZEL LESS MONITOR INCREASE PRODUCTIVITY
The SC-2402 adopts a seamless 3-sided bezel-less design to create a productive work environment and reduce gaps between monitors. Perform rapid analysis, manage, and control video sources from all locations. Evolving situations require quick decisions, which seamless monitors can help with.
MULTIPLE MONITOR SETUPS MADE EASY
With VESA 100 x 100mm, the SC-2402 is compatible with AG Neovo’s mounting portfolio of desk and wall mounts. Whether you’re looking for a dual, quad, or more monitor set-up, AG Neovo is a one-stop-shop for creating ergonomic workstations in a control room.
HIGHER COST PERFORMANCE
Designed with long-hour monitoring in mind, you can expect a reduction in system maintenance efforts and consequentially higher cost performance. The SC-2402 is commercial grade and meant to work 24/7, 365 days a year. Static images that would otherwise cause screen burn-in are gone with AG Neovo’s patented Anti-Burn-in technology. Expect prolonged life for LCD screens.
PERFECT MATCH TO CCTV IMAGES
There is a special pre-configured CCTV Mode that maximises image clarity in low-light footage. Quickly fine-tune your video footage with adjustments for sharpness, saturation, contrast, brightness, and more. Don’t waste time testing and re-adjusting constantly, this product already has it all figured out!
ENHANCED GAMMA SELECTION
Offering an enhanced gamma selection makes for amazing visual optimization. Improve the light, shadow, and colour balance quality of your videos with ease.
MISSING DETAILS IN DARK SCENES IS A THING OF THE PAST
More detail from black-level adjustment means improved visibility of dark images.
CONTRAST ENHANCER
By coming with a contrast enhancer, the surveillance monitor enables low-contrast images to become more clear and defined.
ADAPTABLE TO SURVEILLANCE ENVIRONMENT NEEDS
Tailor the display to your needs with on/off toggles for the blue screen. When there is no signal available, a blue screen will show that is ideally designed for dark and low-light environments.
VERSATILE CONNECTIVITY WITH BNC AND HDMI INPUTS
This 24-inch surveillance monitor with BNC Connector supports both analogue and digital video inputs. Easily connect to various video surveillance equipment with HDMI, VGA and BNC in/out ports. BNC port allows connecting CCTV cameras directly to the monitor. With this bezel less security monitor, there is no need for a DVR/converter to get straight to instant monitoring.
-
| Feature |
Specification |
| Panel |
LED-Backlit TFT LCD, VA |
| Panel Size |
23.8" |
| Max. Resolution |
FHD 1920 x 1080 |
| Pixel Pitch |
0.275 mm |
| Brightness |
250 cd/m² |
| Contrast Ratio |
20,000,000:1 (DCR) |
| Viewing Angle (H/V) |
178°/178° |
| Display Colour |
16.7M |
| Response Time |
5 ms |
| Surface Treatment |
Anti-Glare Treatment (Haze25%),3H Hard Coating |
| Frequency (H) |
30 kHz-85 kHz |
| Frequency (V) |
48 Hz-75 Hz |
| Signal Input |
HDMI 1.4 x 1, VGA 15-Pin D-Sub x 1, Composite BNC x 1 |
| Signal Output |
Composite BNC x 1 |
| Audio In |
Stereo Audio Jack (3.5 mm) |
| Internal Speakers |
2W x 2 |
| Power Supply |
Internal |
| Power Requirements |
AC 100-240V, 50/60 Hz |
| On Mode |
15W (On) |
| Standby Mode |
< 0.5W |
| Off Mode |
< 0.3W |
| Temperature |
5°C-35°C (41°F-95°F) |
| Humidity |
20%-85% (non-condensing) |
| Storage Temperature |
-20°C-60°C (-4°F-140°F) |
| Storage Humidity |
10%-90% (non-condensing) |
| VESA FPMPMI |
Yes (100 x 100 mm) |
| Tilt |
-5° to 20° |
| Kensington Security Slot |
Yes |
| Product with Base (W x H x D) |
540.1 x 408.3 x 226.5 mm (21.3" x 16.1" x 8.9") |
| Product w/o Base (W x H x D) |
540.1 x 322.1 x 41.8 mm (21.3" x 12.7" x 1.7") |
| Packaging (W x H x D) |
606.0 x 480.0 x 108.0 mm (23.9" x 18.9" x 4.3") |
| Product with Base |
3.4 kg (7.5 lb) |
| Product w/o Base |
3.0 kg (6.6 lb) |
| Packaging |
4.8 kg (10.6 lb) |
| Certifications & Compliance |
CE, LVD, WEEE, RoHS, REACH, UKCA, EAC, FCC, ICES-003 |
| Supplied |
Audio Cable, Power Cord, Quick Start Guide, VGA Cable |
| Optional Accessories |
Ceiling Mount (Landscape only) CMP-01 + WMK-03; Wall Mount (Landscape only) PMK-01, WMA-01, WMK-01, WMK-03; Desk mount (Landscape only) DMC-01, DMC-02D, DMS-01D, ES-02 |
-
AG Neovo provides the following limited warranty. This limited warranty applies only to the original End User and to no other purchaser or transferee.
FOR LCD DISPLAYS
AG Neovo warrants its LCD Monitor products and parts against defects in materials and workmanship under normal use for a period of Three (3) Years for parts from the date of initial retail purchase. AG Neovo warrants LCD Panel for a period of Three (3) years from the date of initial retail purchase. During this period, AG Neovo will repair or replace a defective product or part without charge.
Changes to or updates of the following warranty conditions and procedures can be found at the AG Neovo website or may be obtained from AG Neovo by contacting your local AG Neovo office.
WHAT THE WARRANTY COVERS
The AG Neovo warranty obligations for the product are limited to the terms set forth below.
- AG Neovo warrants the product against defects in materials for a period of three (3) years for all series of TFT LCD panel and three (3) years for parts.
- With respect to LCD display pixel quality inspection of the defective display pixels must be performed in black screen. A maximum of 3 bright pixels or 3 dark pixels is allowed in an LCD panel; the total number of dark and bright pixels should not exceed 3 pixels for the whole area.
- If a defect arises within the warranty period, please contact the AG Neovo service centre; you should provide your products serial number, and your contact information, such as address, and phone number.
- AG Neovo warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty, whichever provides longer coverage.
WHAT THE WARRANTY DOES NOT COVER
- Products on which the serial number has been defaced, modified or removed;
- Products, which are not accompanied by a copy of the original invoice or where information on the original invoice has been altered or erased in any manner whatsoever.
- Damage, deterioration or malfunction resulting from:
- Accident, abuse, misuse, neglect, fire, water/liquids, lightning, or other acts of nature, unauthorised product modification, or failure to follow instructions supplied with the Products.
- Repair or attempted repair by anyone not authorised by AG Neovo.
- Any damage of the Products due to shipment.
- Removal or installation of the Products.
- External causes to the Products, such as electric power fluctuations or failure.
- Use of supplies or parts not meeting the specifications of AG Neovo.
- Normal wears and tear.
- Any other cause, which does not relate to a Product defect.
- Damage to, or abuse of, the coating on the surface of the display.
- Scratched or broken panel.
- Cracked Printed Circuit Board or abused housing and/or base.
- Exposure to an excessive dusty and/or humid environment.
- Because LCD panel is the liquid characteristic, damage caused by static (non-moving) images displayed for lengthy periods of time (also referred to as “burn-in”).
AG Neovo has the right to revise the policy.
Please contact local AG Neovo office to get detailed information.
FOR ACCESSORIES
AG Neovo warrants its accessories to be free from defects in material and workmanship under normal operating conditions for a period of 12 months limited warranty.
Changes to or updates of the following warranty conditions and procedures can be found at the AG Neovo website or may be obtained from AG Neovo by contacting your local AG Neovo office.
WARRANTY CONDITIONS
- The warranty applies only to products distributed by AG Neovo.
- The warranty applies only to defects in material or workmanship as limited above and does not include normal wear items. The warranty applies only to defects which occur during normal use and does not extend to damage to products or parts which results from alterations, repairs, modifications, faulty installation or service by anyone other than an authorised AG Neovo Service Centre; damage to products or parts caused by accident, abuse, misuse, maintenance, mishandling, misapplication, or use in violation of instructions furnished by us; damage which occurs in shipment or any damage caused by an act of God, such as lightning or line surges.
- You must retain your bill of sale, invoice or receipt.
- Any replacement parts provided to the purchaser in fulfillment of this warranty does not extend the warranty period only the residual portion of the original warranty period remains.
AG Neovo has the right to revise the policy.
Please contact local AG Neovo office to get detailed information.
For information on obtaining warranty service, call your AG Neovo dealer, AG Neovo’s Customer Support hotline, or email service centers.
-
