| AMPLIFICATION |
|
| Channel Separation (Crosstalk) |
> 65 dB, adjacent channels at 1 kHz |
| Frequency Response |
20 Hz – 20 kHz (±0.5 dB) at 1 W |
| Gain, High-Impedance |
42 dB |
| Gain, Low-Impedance |
36 dB, Mono mode / 42 dB, V-Bridge mode / 36 dB, I-Share mode / 42 dB, Quad mode |
| Maximum Peak Power, Symmetrical |
1000 W |
| Number of Channels |
8 |
| Power Class |
Class D |
| Rated Power, Symmetrical |
450 W per channel at 2 Ω / 500 W per channel at 4 Ω / 300 W per channel at 8 Ω |
| SNR |
> 102 dB (1 dB below rated power, A-weighted) |
| THD+N |
< 0.4% at 1 W (20 Hz – 20 kHz) |
| AUDIO INPUTS, ANALOG |
|
| Channels |
8 balanced, line |
| Connectors |
(8) 3-pin Euroblock |
| Input Impedance |
> 100 kΩ |
| Maximum Input Level |
24 dBu at 24 dBu sensitivity |
| Sensitivity |
0 dBu, +4 dBu, +12 dBu, +24 dBu, selectable |
| AUDIO INPUTS/OUTPUTS, DIGITAL |
|
| Channels |
Expansion card-dependent |
| Connectors |
Expansion card-dependent |
| AUDIO OUTPUTS, ANALOG |
|
| Channels |
2–8, configurable |
| Connectors |
(2) 8-pin Euroblock |
| COMPLIANCE |
|
| EMC |
This Product meets the immunity requirements for the E2 class EN55103-2 directive. |
| ELECTRICAL |
|
| Current Draw, Idle |
0.3 A (standby) or 1.3 A (awake) at 120 VAC, 60 Hz / 0.1 A (standby) or 0.5 A (awake) at 230 VAC, 50 Hz |
| Current Draw, Inrush |
15.4 A at 230 VAC, 50 Hz |
| Mains Connector |
IEC 60320-C20 inlet |
| Mains Voltage |
100–240 VAC, 50/60 Hz |
| Protections |
High temperature, DC, short circuit, high frequency, voltage limiter, current limiter, inrush current, mains circuit breaker |
| Power Consumption |
31 W standby (idle), 176 W awake (idle), 1789 W maximum |
| GENERAL |
|
| Computer Interface Connection |
USB Type-B, RJ-45 (Ethernet, 100 Mbps) |
| Notification Outputs |
(1) 3-pin Euroblock |
| Software Applications |
ControlSpace Designer 3.2 or later (Windows) |
| INDICATORS AND CONTROLS |
|
| Controls, Front Panel |
(1) navigation soft key, (5) menu soft keys, (1) scroll/select knob (rotary/push) |
| Controls, Rear Panel |
POWER SWITCH – ON/OFF AC power switch |
| LED Status Indicators |
(1) input signal LED, (1) input clip LED, (1) output limit LED, (1) fault LED |
| INTEGRATED DSP |
|
| A/D and D/A Conversion |
48 kHz / 24-bit |
| Audio Latency |
< 0.95 ms, analog input to analog output |
| Crossover Types |
Butterworth, Bessel, or Linkwitz-Riley, up to 48 dB/octave |
| Delay |
3 s |
| DSP-Enabled |
Yes |
| Equalization |
Input: 5-band parametric EQ (±20 dB), notch, shelving, high-pass, low-pass / array (ArenaMatch, RoomMatch) / band-pass crossover / loudspeaker: 9-band parametric EQ (±20 dB), notch, shelving |
| Limiters |
Peak voltage, RMS voltage |
| Presets |
Bose Professional loudspeaker presets |
| Processing Functions |
Input EQ, array EQ, loudspeaker EQ, peak voltage limiter, RMS voltage limiter, delay, band-pass, matrix mixer |
| PHYSICAL |
|
| Colors |
Black |
| Cooling System |
Microprocessor-controlled, variable-speed fans, front to rear airflow |
| Mounting/Rigging Provisions |
Rack-mounting |
| Net Weight |
28.4 lb (12.9 kg) |
| Operating Temperature |
0 °C to 40 °C (32 °F to 104 °F) |
| Product Dimensions (H×W×D) |
3.5 in × 19.0 in × 20.7 in (88 mm × 483 mm × 525 mm) |
| Rack Spaces |
2 |
| Shipping Weight |
34.5 lb (15.7 kg) |
