Physical Interfaces |
|
WAN1 |
VDSL2 / ADSL2+, RJ-11 |
WAN2/LAN Switchable Port |
1x Gigabit Ethernet (1G/100M/10M), RJ-45 |
WAN3 |
USB 2.0 Port for 3G/4G Modem (not included) |
LAN Ports |
4x Gigabit Ethernet (1G/100M/10M), RJ-45 (3x with WAN2 enabled) |
|
|
Antenna Specifications |
|
Wireless Antennas (wireless 'ac' models) |
2x External Dipole |
|
5GHz Gain: 4 dBi |
|
2.4GHz Gain: 2 dBi |
|
|
Performance |
|
Router Performance |
100 Mb/s Max Sync Rate with VDSL2 |
|
950 Mb/s NAT Throughput for Ethernet WAN with Hardware Acceleration |
|
700 Mb/s NAT Throughput per WAN without Hardware Acceleration |
|
50,000 NAT Sessions |
VPN Performance |
150 Mb/s IPsec (AES256) VPN Throughput |
|
80 Mb/s SSL VPN Throughput |
|
Max. 2 Concurrent VPN Tunnels |
|
|
Internet Connection |
|
Hardware Acceleration |
802.1p/q Multi-VLAN Tagging |
|
Multi-VLAN/PVC |
|
Connection Detection: PPP, ARP Detect, Ping Detect |
|
WAN Data Budget |
|
Dynamic DNS |
|
DrayDDNS – with automated LetsEncrypt Certificates |
|
Full Feature-set Hardware Acceleration: |
|
Hardware Accelerated Quality of Service |
|
Multi-WAN Data Budget |
|
Traffic Graph & Data Flow Monitor |
|
Bandwidth Limit |
|
IPv4 Connection Types: PPPoE / PPPoA, MPoA, DHCP, Static IP, PPTP/L2TP (Ethernet WAN) |
|
IPv6 Connection Types: |
|
DSL & Ethernet: PPP, DHCPv6, Static IPv6, TSPC, AICCU, 6rd, 6in4 Static Tunnel |
|
USB 4G/LTE Modem: TSPC, AICCU |
|
|
VDSL & ADSL Features |
|
BT Infinity Option 1 & Option 2 Compatible |
Compliant with Openreach SIN 498 |
Auto Detection of VDSL and ADSL line modes |
Support for G.INP (G.998.4) & Vectoring (G.993.5) |
|
VDSL Standards: ITU-T G.993.1 VDSL |
|
ITU-T G.993.2, G.997.1 VDSL2 |
|
Band Plan: G.998, G.997 |
|
Annex A, Annex B, Annex C |
|
VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a (not 35b or G.fast) |
|
OLR, UPBO, DPBO Supported |
|
US0 Supported |
|
Loop Diagnostic Mode |
|
DSL Forum WT-114, TR048/67, TR-100 |
|
ADSL Standards: ANSI T1.413 Issue2 |
|
ITU-T G.992.1 G.dmt (ADSL) |
|
ITU-T G.992.2 G.lite |
|
ITU-T G.992.3 ADSL2 including Annex M/J |
|
ITU-T G.992.5 ADSL2+ including Annex M/J |
|
ATM Protocols: RFC-2684/RFC-1483 Multiple Protocol over AAL5 |
|
RFC-2516 PPP over Ethernet |
|
RFC-2364 PPP over AAL5 |
|
Support for RFC4638 for MTU up to 1500 |
|
|
Wireless Features (‘ac’ models) |
|
AC1300 - 11ac 'Wave 2' Dual Band Wireless (‘ac’ models) |
802.11ac 2x2 wireless access point |
|
Compatible with 802.11a/b/g/n wireless |
|
Dual-band (2.4/5Ghz) simultaneous wireless |
|
Up to 866Mbps PHY rate at 80MHz with 5GHz |
|
Up to 400Mbps PHY rate at 40MHz with 2.4GHz (256-QAM) |
|
Channel Bandwidth: 20/40MHz for 2.4GHz, 20/40/80MHz for 5GHz |
|
MU-MIMO |
|
Tx Beamforming |
|
Mesh Root support with DrayTek VigorAP Mesh Nodes – New! |
|
Up to 4 SSIDs per radio band |
|
Extended 5Ghz Band - Channels 36-48, 52-64, 100-140 |
|
Wireless Optimisation: Airtime Fairness, AP-Assisted Mobility, Band Steering |
|
Bandwidth Management (Per Station / Per SSID) |
|
WMM (Wireless MultiMedia) |
|
WPS - WiFi Protected Setup |
|
Station Control - Time limited wireless connectivity per Station (e.g. 1 hour) |
|
EAPOL Key Retry - Disable EAPOL Key Retry to protect unpatched WLAN clients from KRACK |
|
Wireless Security: WPA2 |
|
WPA3 – New! |
|
Pre-Shared Key authentication |
|
WEP/WPA for Legacy Clients |
|
Access Control – Blacklist / Whitelist client MAC addresses per SSID |
|
|
Firewall & Content Filtering |
|
IP-based Firewall Policy |
User-based Time Quota |
|
DoS Attack Defence |
|
Spoofing Defence |
|
Content Filtering: |
|
Application Content Filter |
|
URL Content Filter |
|
DNS Keyword Filter |
|
Web Category Filter (requires GlobalView subscription) |
|
DoH (DNS over HTTP) & DoT (DNS over TLS) Filtering - New! |
|
|
NAT Features |
|
NAT Port Redirection |
Open Ports |
|
Port Triggering |
|
DMZ Host |
|
UPnP |
|
ALG (Application Layer Gateway): SIP, RTSP, FTP, H.323 |
|
VPN Pass-Through: PPTP, L2TP, IPsec |
|
|
LAN Management |
|
802.1q Tag-based, Port-based VLAN |
Up to 4 LAN Subnets |
|
Up to 8 VLANs |
|
DHCP Server: |
|
Multiple IP Subnet |
|
Custom DHCP Options |
|
Bind-IP-to-MAC |
|
DHCP Pool Count up to 253 addresses per subnet |
|
Wired 802.1x Port Authentication |
|
Port Mirroring |
|
Local DNS Server |
|
Conditional DNS Forwarding |
|
|
Networking Features |
|
Policy-based Routing |
Protocol, IP Address, Port, Domain/Hostname, Country |
|
DNS Security (DNSSEC) |
|
Local RADIUS server |
|
SMB File Sharing (Requires external USB storage) |
|
Multicast: IGMP Proxy, IGMP Snooping & Fast Leave, Bonjour |
|
Compatible with IPTV and ISP Video on Demand services (YouView, Sky Q) |
|
Routing Features: IPv4 & IPv6 Static Routing, Inter-VLAN Routing |
|
|
VPN Features |
|
2 Concurrent active VPN Tunnels |
LAN-to-LAN - Dial-Out VPN Client / Dial-In VPN Server |
|
Teleworker-to-LAN – Dial-In VPN Server |
|
IKE Authentication: Pre-Shared Key and Digital Signature (X.509) |
|
Encryption: MPPE, DES, 3DES, AES (128/192/256) |
|
Authentication: SHA-256, SHA-1 |
|
Dead Peer Detection (DPD) |
|
IPsec NAT-Traversal (NAT-T) |
|
Virtual IP Mapping – Resolve VPN IP subnet/range conflicts |
|
DHCP over IPsec |
|
DrayTek VPN Matcher – Connect to a VPN router that’s behind NAT/CG-NAT - New! |
|
VPN Protocols: |
|
IPsec IKEv1, IKEv2, IKEv2 EAP |
|
IPsec-XAuth |
|
DrayTek SSL VPN |
|
OpenVPN |
|
PPTP for legacy applications |
|
L2TP, L2TP over IPsec |
|
User Authentication: |
|
Local |
|
RADIUS |
|
mOTP - Mobile One Time Password |
|
TOTP - Time-based One Time Password, compatible with Google Authenticator - New! |
|
|
Bandwidth Management |
|
IP-based (IPv4 & IPv6) Bandwidth Limit |
App-based Bandwidth Limit - New! |
|
IP-based (IPv4 & IPv6) Session Limit |
|
Quality of Service (QoS) |
|
Classify via TOS, DSCP, 802.1p, IP Address, Service Type |
|
4 Priority Queues |
|
App QoS |
|
VoIP Prioritization |
|
Class-based Outbound Traffic Tagging: DSCP & IP Precedence |
|
Hardware QoS - New! |
|
|
Management |
|
Local Service |
HTTP, HTTPS, Telnet, SSH, FTP, TR-069 |
|
Config File Export & Import |
|
Import Config from Vigor 2760, 2762, 2765, 2766 |
|
Auto Backup Config to USB Storage – New! |
|
Firmware Upgrade via TFTP, HTTP, TR-069 |
|
2-Level Administration Privilege |
|
Access Control Features: Access List, Brute Force Protection |
|
Syslog |
|
SMS, E-mail Notification Alert |
|
SNMP: v1, v2c, v3 |
|
Managed by VigorACS |
|
|
Router Central Management Features |
|
AP Management |
2 VigorAP access points |
|
DrayTek Mesh: Up to 7 VigorAP access points – New! |
|
|
Operating Requirements |
|
Wall or Shelf Mountable |
|
Temperature Operating |
0 °C ~ 40 °C |
Storage |
-25 °C ~ 70 °C |
Humidity |
10% ~ 90% (non-condensing) |
Power Consumption |
21 Watts maximum (ac model) |
Operating Power |
DC 12V (via external PSU, supplied) |
Power Requirements |
100-240VAC |
|
|
Dimensions |
|
Width |
207mm |
Depth |
131mm |
Height |
42mm |
|
|
Warranty |
|
Two (2) Years RTB |
|
Optional VigorCare Enhanced Warranty Available |
|
VigorCare A3 3 Year Subscription |
VCARE-A3 |
VigorCare A5 5 Year Subscription |
VCARE-A5 |
|
|
Box Contents |
|
Vigor 2763ac router |
|
Quick Start Guide |
|
Screws & wall plugs for wall mounting |
|
2m Cat-5e RJ-45 Network Cable |
|
2x Detachable Wireless LAN Antennas (‘ac’ models) |
|
DC 12V Power Supply with UK Plug |