-
Intellinet Gigabit High-Power PoE+ Extender Repeater | 560962
Extend the range of a PoE connection
The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater, Model 560962, is designed to extend connection distances from a PoE source to an output device another 100 m (328 ft.) via Cat5e or Cat6 cable. You can cover even longer distances by cascading these extenders on a network. The PoE+ extender does not need any additional power supply, as it draws the power it needs from the PoE input.
Simple Installation
Simply connect the "PoE In" port with your PoE injector or PoE switch, and connect the "PoE Out" with the PoE device that you wish to connect; e.g., a VoIP phone or a PoE network camera. That's it. There is nothing to configure. It simply could not be any easier.
Reduce Wiring Costs
No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5 cabling to deliver DC power as well as transfer data.
Power over Ethernet 802.3at Compliant
The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater supports the IEEE 802.3at protocol and is designed to forward data at Gigabit speeds and up to 30 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.).
Cascading Power
You can daisy-chain multiple of the PoE extenders to increase the transmission distance even further. For each PoE extender added, you lose about 4 watts of usable PD power, but if you start with a PoE injector that outputs 30 watts of IEEE 802.3at power — for example, the Intellinet Network Solutions PoE injector (Model 560566) — then you still have 8.6 watts for your PoE device, 5 PoE extenders down the line and 600 meters (1968 ft.) away.
Product Features
Extends an existing PoE connection beyond the 100m (328-ft.) limit
Saves time and money by delivering data and power via existing network cables
Covers longer distances by cascading multiple PoE extenders (Model 560962) together
Daisy-chain up to five PoE extenders for a distance of up to 600 m (1968 ft.)
Supports 10/100/1000 Mbps data rates and delivers up to 25 W to a connected PoE device
PoE awareness ensures that power is only sent to IEEE 802.3af/at-compliant devices, non-PoE devices only receive data
Requires no additional power supply; draws the power directly from the PoE input
Compatible to IEEE 802.3at/af-compliant PoE injectors and PoE switches (PSE)
Compatible to IEEE 802.3at/af-compliant powered devices (PD)
LEDs for PoE and data
Fanless design ideal for silent operation
Compact metal case
Mounting holes for wall mounting
Fully NDAA-compliant
ATTENTION: Not compatible to 16-Port Fast Ethernet PoE+ Switch model 560849
Three-Year Warranty
-
Category |
Details |
Standards |
IEEE 802.3af (PoE), IEEE 802.3at (PoE+), IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
General |
Media support: 100Base-TX Cat5/1000Base-T Cat5e UTP/STP RJ45, 8 pin |
|
Ports: 1 RJ45 input (10/100/1000 Mbps) for PoE signal, 1 RJ45 PoE output (10/100/1000 Mbps) |
|
Certifications: FCC Class A, CE, UKCA, NDAA |
Power |
Max PD output power: |
|
- 24.6 W @ 200 m (656 ft) using one PoE extender |
|
- 20 W @ 300 m (984 ft) using two PoE extenders |
|
- 16.2 W @ 400 m (1312 ft) using three PoE extenders |
|
- 12.5 W @ 500 m (1640 ft) using four PoE extenders |
|
- 8.6 W @ 600 m (1968 ft) using five PoE extenders |
|
Input power: IEEE 802.3af/at compliant PSE |
Environmental |
Housing: Metal |
|
Dimensions: 102.8 x 31 x 20 mm (4.05 x 1.22 x 0.79 in) |
|
Net weight: 107 g (3.77 oz) |
|
Gross weight: 183 g (6.46 oz) |
|
Operating temperature: -10 – 50°C (14 – 122°F) |
Package Contents |
Gigabit High-Power PoE+ Extender Repeater, Instructions |
-