Mechanical |
Dimensions : 94.9 x 40 x 31.1 mm (3.7 x 1.6 x 1.2") |
|
Weight : 67 g (2.4 oz) |
|
Enclosure material : Polycarbonate |
|
Mounting options : Wall-mount, gang box mount* |
|
Weatherproofing : IP54 |
Hardware |
Networking interface : 10/100 MbE |
|
Max. power consumption : 6W |
|
Power method : PoE |
|
Supported voltage range : 44–57V DC |
|
Button : (1) Factory reset |
|
LEDs : White/Blue |
|
Connectivity : Ethernet, BLE 4.1 |
|
NFC frequency : 13.56 MHz |
|
NFC reading range : <30 mm |
|
NFC standards : ISO 14443A, 14443B, 15693 |
|
NFC technology : NFC Tag 1, 2, 3, 4, 5 |
|
: MIFARE Classic |
|
: MIFARE Plus |
|
: MIFARE Ultralight |
|
: MIFARE DESFire |
|
Operating environment : Outdoor use |
|
Ambient operating temperature : -20 to 40° C (-4 to 104° F) |
|
Ambient operating humidity : 5 to 90% noncondensing |
Software information |
The software version of a product can be checked at https://unifi.ui.com
|
UL 294 level |
Destructive attack: Level I |
|
Line security: Level I |
|
Endurance: Level I |
|
Standby power: Level I |
UL 294 statement |
Compliance with IEEE 802.3 specifications was not verified as part of UL 294. |
|
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
PoE cabling requirements |
Cable 5e cabling is the minimum performance category recommended. |
|
The performance category utilized should match the transmission speed required at the installation site. |
|
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. |
CAN/ULC-60839-11-1 Grade |
Grade assignment: I |
Certifications |
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
Document number, and issue date |
UA-Reader Lite, V02 |
LED |
System : Steady blue: Adopted/device is ready |
|
: Steady white: Pending adoption |
|
: Blinking white/blue: Upgrading firmware |
Software |
Management application : UniFi Access: Version 1.5.9 and later |