BOSE PowerShare PS404D Adaptable Power Amplifier
SKU: 813375-2310
£1,600.02 (Excl. VAT)
- Description
- Specifications
- Downloads
-
Bose PowerShare PS404D – 4-Channel 400W Adaptable Power Amplifier with Dante, DSP, and Flexible Low/High-Impedance Outputs
Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven Bose Professional PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 400 watts for installed applications. This means you can distribute the total 400 watts asymmetrically across all outputs or use any individual output to deliver full power. And with support for both low- and high-impedance loads up to 100V, it’s easy to adapt PowerShare amplifiers to a wide range of applications. ControlSpace Designer software allows for Ethernet-based configuration and quick setup of external control options. With onboard Dante® audio networking, you have the flexibility to place PowerShare amplifiers away from source locations and closer to loudspeakers. This unique set of features and technologies makes PowerShare one of the most versatile, high-performance amplifiers available today.
FEATURES
PowerShare technology: Distribute the total 400 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.Load-independent outputs: Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.
Integrated Dante audio networking: Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.
Dual Feedback Loop system: Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose Professional PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.
ControlSpace networking: Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.
Integrated loudspeaker processing: Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.
Auto-standby: Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.
Applications
Designed for a wide range of applications, including:Performing arts venues
Places of worship
Conference centers
Retail stores
Restaurants and bars
Hospitality venues
-
Category Specification AMPLIFICATION Channel Separation (Crosstalk) > 85 dB at 1 kHz, > 65 dB at 20 kHz Dynamic Range 100 dB at rated power, A-weighted Frequency Response 20 Hz – 20 kHz (±0.5 dB) at 1 W Gain, High-Impedance 35 dB, 70V mode / 38 dB, 100V mode Gain, Low-Impedance 30.2 dB Maximum Peak Power, Asymmetrical 800 W Maximum Peak Power, Symmetrical 200 W Number of Channels 4 Rated Power, Asymmetrical 400 W Rated Power, Symmetrical 100 W SNR 100 dB (at rated power, A-weighted) THD+N < 0.04% at 1 kHz, 4–8 Ω, 70V/100V AUDIO INPUTS, ANALOG Channels 4 balanced, line Connectors (1) 12-pin Euroblock Input Impedance 20 kΩ Maximum Input Level 20 dBu at 12 dBu sensitivity Sensitivity 4 dBu low, 12 dBu high AUDIO INPUTS/OUTPUTS, DIGITAL Channels 4 Dante in Connectors (2) RJ-45 Dante in/thru Type 12-pin Euroblock AUDIO OUTPUTS, ANALOG Channels 4 Connectors (1) 8-pin inverted Euroblock COMPLIANCE EMC This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment. ELECTRICAL Current Draw, Idle 0.1 A at 120 VAC, 60 Hz / 0.06 A at 230 VAC, 50 Hz Current Draw, Inrush 8.0 A at 120 VAC, 60 Hz / 14.1 A at 230 VAC, 50 Hz Mains Connector IEC C14 inlet Mains Voltage 100–240 VAC (±10%), 50/60 Hz Protections High temperature, output short circuit, extra high frequency, excessively low/high AC line voltage Power Consumption 14 W standby, 500 W maximum GENERAL Computer Interface Connection RJ-45 (Ethernet, 100 Mbps) Software Applications ControlSpace Designer 5.4 or later (Windows) INDICATORS AND CONTROLS Controls, Front Panel (1) power button Controls, Rear Panel Output attenuators, mute contact LED Status Indicators (1) power/status LED, (4) input signal LEDs, (4) output limit LEDs INTEGRATED DSP A/D and D/A Conversion 48 kHz / 24-bit Audio Latency < 1 ms, analog input to analog output Crossover Types Butterworth, Bessel, or Linkwitz-Riley, up to 48 dB/octave Delay 50 ms, Outputs 3–4 only DSP-Enabled Yes Equalization Input EQ: 9-band parametric EQ (±18 dB), notch, shelving, high-pass, low-pass / band-pass crossover / loudspeaker EQ: 9-band parametric EQ (±18 dB), notch, shelving Limiters Peak voltage, RMS voltage Presets Bose Professional loudspeaker presets Processing Functions Input EQ, loudspeaker EQ, peak voltage limiter, RMS voltage limiter, delay, band-pass, matrix mixer, mute/output polarity inversion PHYSICAL Colors Black Cooling System Microprocessor controlled, variable speed fans, left to right air flow Mounting/Rigging Provisions Rack-mounting Net Weight 14.1 lb (6.4 kg) Product Dimensions (H×W×D) 1.7 in × 19.0 in × 16.3 in (44 mm × 483 mm × 414 mm) Rack Spaces 1 Shipping Weight 17.2 lb (7.8 kg) -
Description Downloads BOSE PowerShare PS404D Adaptable Power Amplifier DataSheet Downloads
Book a Free Product Demo
Remote or on-site. No obligation.
Integrator or Installer?
Trade pricing, volume discounts, same-day collection.
Education & Public Sector Solutions
Exclusive pricing, flexible terms, and dedicated support for schools, universities, NHS, and government organisations.
Need help choosing the right product?
Speak directly with a dedicated Screen Moove expert and get the right solution, first time.
Call us on: 020 8191 9223
Email us: info@screenmoove.com
Contact us
Simply complete our contact form, and we will promptly respond to your inquiries.
If you have any questions or enquiry, please fill out the form below with all of your details and we'll get back to you shortly.