BOSE PowerShare PS604D Adaptable Power Amplifier | 813403-2310
SKU: 813403-2310
£1,649.85 (Excl. VAT)
- Description
- Specifications
- Downloads
-
Bose PowerShare PS604D Amplifier | 4-Channel 600W | Dante | DSP | 813403-2310
Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven Bose Professional PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 600 watts for installed applications. This means you can distribute the total 600 watts asymmetrically across all outputs or use any individual output to deliver full power. And with support for both low- and high-impedance loads up to 100V, it’s easy to adapt PowerShare amplifiers to a wide range of applications. ControlSpace Designer software allows for Ethernet-based configuration and quick setup of external control options. With onboard Dante® audio networking, you have the flexibility to place PowerShare amplifiers away from source locations and closer to loudspeakers. This unique set of features and technologies makes PowerShare one of the most versatile, high-performance amplifiers available today.
FEATURES
PowerShare technology: Distribute the total 600 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
Load-independent outputs: Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.
Integrated Dante audio networking: Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.
Dual Feedback Loop system: Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose Professional PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.
ControlSpace networking: Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.
Integrated Loudspeaker Processing: Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.
Auto-standby: Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.
Applications
Designed for a wide range of applications, including:
Performing arts venues
Places of worship
Conference centers
Retail stores
Restaurants and bars
Hospitality venues -
Category Attribute Value AMPLIFICATION Channel Separation > 85 dB @ 1 kHz, > 65 dB @ 20 kHz Dynamic Range 100 dB A-weighted Gain (Low-Z / Hi-Z) 32 dB / 35 dB (70V), 38 dB (100V) Max Power (Sym / Asym) 300 W / 1200 W Rated Power (Sym / Asym) 150 W / 600 W SNR 100 dB A-weighted Frequency Response 20 Hz – 20 kHz (±0.5 dB) THD+N < 0.04% @ 1 kHz Channels 4 AUDIO INPUTS Analog Channels 4 balanced line Connectors 1 × 12-pin Euroblock Input Impedance 20 kΩ Max Input Level 20 dBu Sensitivity 4 dBu / 12 dBu DIGITAL I/O Dante Channels 4 Dante in Connectors 2 × RJ-45 (in/thru) AUDIO OUTPUTS Analog Channels 4 Connectors 1 × 8-pin Euroblock COMPLIANCE EMC EN55103-2 compliant (E2 environments) ELECTRICAL Voltage Range 100–240 VAC (±10%), 50/60 Hz Idle / Max Current 0.1 A / 0.06 A idle, 700 W max Inrush Current 8.0 A @ 120V / 14.1 A @ 230V Power Connector IEC C14 inlet GENERAL Software ControlSpace Designer 5.4+ Interface RJ-45 Ethernet (100 Mbps) CONTROLS/LEDs Front / Rear Controls Power button / attenuators, mute LED Indicators Power, signal, output limit DSP Delay 50 ms (Outputs 3–4) EQ 9-band PEQ, notch, HP/LP, band-pass, crossovers Crossover Types Butterworth, Bessel, Linkwitz-Riley Latency < 1 ms Limiters Peak, RMS Presets Bose loudspeaker presets PHYSICAL Color Black Cooling Variable-speed fans (L–R flow) Mounting Rack-mountable (1U) Dimensions (H×W×D) 44×483×414 mm (1.7×19.0×16.3 in) Weight (Net / Shipping) 6.4 kg / 7.8 kg PRODUCT CODES 813403-1310 (US), -2310 (EU), -5310 (AU), -4310 (UK), -3310 (JP) INCLUDED ITEMS 2, 8, 12-pin Euroblocks, PS604D, power cord, guide -
Description Downloads BOSE PowerShare PS604D Adaptable Power Amplifier | 813403-2310 DataSheet Downloads
Book a Free Product Demo
Remote or on-site. No obligation.
Integrator or Installer?
Trade pricing, volume discounts, same-day collection.
Education & Public Sector Solutions
Exclusive pricing, flexible terms, and dedicated support for schools, universities, NHS, and government organisations.
Need help choosing the right product?
Speak directly with a dedicated Screen Moove expert and get the right solution, first time.
Call us on: 020 8191 9223
Email us: info@screenmoove.com
Contact us
Simply complete our contact form, and we will promptly respond to your inquiries.
If you have any questions or enquiry, please fill out the form below with all of your details and we'll get back to you shortly.