BluStream USB 3.2 Gen1 HDBaseT™ Extender - Device | UEX3D

The UEX3D is a USB Device solution utilises HDBaseT™ technology to allow for remote connectivity to a USB 3.2 Gen1 Host at distances of up to 100m over a single CAT6A cable. The UEX3D allows  for 4 x USB Devices (2 x USB type A, and 2 x USB-C) to be connected to a compatible Blustream USB HDBaseT Receiver (Host) extender with support for a combined transmission data bandwidth of up to 5Gbps. 

The UEX3D is backwards compatible with USB 2.0 and 1.1 devices, and utilises bi-directional Power over Cable (PoC) to power from either end of the HDBaseT link. The UEX3D is ideal for applications requiring extension of USB 3.2 Gen1 conferencing cameras, video capture devices, flash/hard drives, KVM devices, audio devices and other USB 3.2 Gen1 devices.

* Requires compatible Blustream USB 3.2 HDBaseT Host product

Key Features
• USB 3.2 Gen1 HDBaseT™ Extender supporting 2 x USB Host devices and 2 x local USB Devices
• Supports USB 3.2 signal extension up to 100m over HDBaseT™ *
• Backwards compatible with USB 2.0 & 1.1 devices 
• Combined USB3.2 Gen1 data transfer rate up to 5Gbps *
• 2 x USB-A & 2 x USB-C port for connection to local devices 
• Provides up to 3A combined power to USB devices (up to 1.7A per single USB port)
• Configurable USB device power management via API commands
• Bi-directional PoC (Power over Cable) to power extenders from either the host or device unit (supports 12-48V PoC)
• Supports bi-directional RS-232 when used with compatible HDBaseT™ products
• PoC function can be enabled/disabled via dipswitch 
• Simple plug and play, no driver installation or setup required

Compatible with Blustream UEX3H and UEX3H-WP * Signal distribution bandwidth and distance are subject to length of device and host USB cables, and CAT cable type. It is recommended to use a minimum of CAT6A cabling. Please note: this product is for USB 3.2 data transfer only, and does not support DP Alt Mode video pass-through

Box Contents
1 x UEX3D
1 x 24V/1.5A power supply
1 x RS-232 control cable (3-Pin to DB9)
1 x Quick Reference Card