Official Partner
The DP6 is a high performance 6.5-inch pendant loudspeaker designed for open architecture spaces or any location where a stylish pendant form factor is desired. Featuring high power handling, high sensitivity and realistic sound reproduction, D SERIES pendant loudspeakers can be used in a wide variety of speech and music applications. They are equipped with a built-in autoformer, supporting low impedance or 70V/100V operation. Uniform voicing means that the DP6 can be combined with other ceiling and surface mount models in the C or D SERIES family without compromising consistency from zone to zone. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity, thereby permitting 3 dB to 6 dB greater output level while requiring half the amplification power of competing products. An easy-access selector switch is conveniently located on the face of the loudspeaker for selectable 8 ohm or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation.
| Category | Feature | Specification |
|---|---|---|
| GENERAL | Height | 14.73 inches (374.2 mm) high enclosure |
| Width | 11.22 inches (285 mm) face diameter | |
| Weight | 11.8 lbs (5.4 kg) | |
| Finish | Black | |
| Material | Grille: Powder coated steel, black or white, paintable | |
| Mounting | Two PHK-15 pendant hang kits, 15ft (4.5m) cables, Gripple™ fasteners | |
| Accessories | Two PHK-15 pendant hang kits | |
| Enclosure | ABS plastic rear cover | |
| Rear cover ingress weather plug | Required Accessories: Electronic high pass filter | |
| CONTROLS & INDICATORS | Control | Front-face wattage / low impedance selector switch |
| AMPLIFIER | Distortion | 500 Hz: 1.74% 2nd Harmonic, 1.19% 3rd Harmonic |
| 2 kHz: 1.18% 2nd Harmonic, 0.35% 3rd Harmonic | ||
| 8 kHz: 0.77% 2nd Harmonic, 0.04% 3rd Harmonic | ||
| LOUDSPEAKER | Loudspeaker Type | Two-way, full-range, coaxial pendant mount loudspeaker |
| Operating Range | 65 Hz - 22 kHz | |
| Crossover | Crossover Frequency: 1.2 kHz | |
| Transformer | 70V: 60W, 30W, 15W, 7.5W and low impedance; 100V: 60W, 30W, 15W | |
| Sensitivity | 94 dB SPL (125 Hz to 12.5 kHz), 92 dB SPL (250 Hz to 4 kHz) | |
| Coverage | 115º conical (1 kHz to 6 kHz), 125º conical (500 Hz to 6 kHz) | |
| Signal Processing | 65 Hz high pass filter | |
| Drivers | LF: 1 x 6.5-inch, HF: 1 x 1-inch exit compression driver | |
| Driver Protection | Self-resetting solid state circuit breaker | |
| AUDIO | Audio Input Connection | Two 2-position Euroblock connectors |
| Impedance | Nominal: 8 ohms; Minimum: 6.9 ohms @ 210 Hz | |
| Maximum Input | 100W continuous, 250W program, 28 volts RMS, 63 volts momentary peak | |
| Maximum Output | 114 dB SPL / 120 dB SPL (peak 8 ohm) | |
| Frequency Response | 80 Hz - 20 kHz (±5 dB) | |
| CERTIFIED SOLUTIONS | Zoom | Zoom Certified |
| COMPLIANCE | Safety Features | Safety cable with SWL of 99 lbs (45 kg) |
| Safety Agency Ratings | EETL listed to comply with UL1480 and CSA60065 | |
| Suspension system listed per UL1598, UL2239, TUV, CSA | ||
| NOTES | Specification Notes | Baffle: Reflex loaded UL 94V-0 rated ABS |
| Axial Q / DI: 4.7 / 6.7, 500 Hz to 6 kHz |
| Description | Downloads |
|---|---|
| Spec Sheet | Downloads |
| Manuals | Downloads |
Compare picture quality, touchscreen performance, software and connectivity with guidance from a commercial display specialist.
Access project pricing, volume discounts, product sourcing support and faster commercial quotations for your client projects.
Access education pricing, purchase-order support, installation services and account management for schools, academies, colleges, universities, NHS organisations, councils and government bodies.
