Official Partner
Powerful 10Gbps and Layer 3 Routing Solution for Enterprise Backbone and Data Center Networking
PLANET SGS-6341-48T6X is a Layer 3 Stackable Managed Gigabit Switch with 10Gbps uplink capability for various network applications and flexible deployment. It features 48 10/100/1000BASE-T RJ45 ports and 6 1G/10GBASE-X SFP+ ports with 216Gbps switch fabric in a 1U rugged case design.
The SGS-6341-48T6X provides high-density performance, Layer 3 static routing, RIP and OSPF. It can handle large amounts of data in a secure topology linking to an enterprise backbone or high-capacity servers. Its WRR and network security features support effective traffic control for ISP, enterprise VoIP, video streaming and multicast applications.
High Performance 10Gbps Ethernet Capacity
The six SFP+ slots support dual-speed 10GBASE-SR/LR or 1000BASE-SX/LX. With 10Gbps uplink interfaces, the SGS-6341-48T6X provides non-blocking switch fabric and wire-speed throughput up to 216Gbps, simplifying LAN upgrades for increasing bandwidth demands.
Central IP Stacking Management
The SGS-6341-48T6X supports IP stacking, allowing network managers to configure up to 8 switches via one single IP address instead of setting each unit individually.
Centralized Hardware Stacking Management
Up to 8 SGS-6341-48T6X units can be stacked as one logical switch. The ring-based stacking design provides redundancy, and switches can be hot-swapped without service interruption.
Redundant Ring, Fast Recovery for Critical Network Applications
The SGS-6341-48T6X supports ITU-T G.8032 ERPS and Spanning Tree Protocol for enhanced reliability, with recovery time of less than 50ms in certain ring networks.
Layer 3 Routing Support
The SGS-6341-48T6X supports Layer 3 static routing, RIP and OSPF to improve network efficiency and routing performance.
Rich Multi-layer Networking Protocols
The SGS-6341-48T6X supports RIP, RIPng, OSPFv2, OSPFv3, BGP and BGP4+, making it suitable for traditional and virtualized data center networks.
Strong Multicast
The SGS-6341-48T6X supports IPv4 IGMPv1/v2/v3 snooping, IPv6 MLD v1/v2 snooping, MVR, PIM-DM, PIM-SM and PIM-SSM.
Full IPv6 Support
The SGS-6341-48T6X provides IPv6 management and secure features such as SSH, ACL, WRR and RADIUS authentication.
Robust Layer 2 Features
The SGS-6341-48T6X supports port speed configuration, port aggregation, VLAN, Spanning Tree Protocol, WRR, bandwidth control, IGMP snooping, 802.1Q VLAN, Q-in-Q, voice VLAN and GVRP.
Excellent Layer 2 to Layer 4 Traffic Control
The SGS-6341-48T6X includes traffic management and WRR features for VoIP, video conferencing, telecom and enterprise applications.
Powerful Security from Layer 2 to Layer 4
The SGS-6341-48T6X supports ACL policies, IEEE 802.1x port-based authentication and RADIUS integration for secure network access.
Efficient and Secure Management
The SGS-6341-48T6X includes console, Web and SNMP management interfaces, Cisco-like command via Telnet or console port, and secure remote management via SSHv1/v2 and TLSv1.2.
Intelligent SFP Diagnosis Mechanism
The SGS-6341-48T6X supports SFP-DDM, allowing administrators to monitor real-time SFP and SFP+ transceiver parameters.
Key Features
Physical Ports:
48 10/100/1000BASE-T RJ45 copper ports
6 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
RJ45 to DB9 console interface for basic management and setup
MGMT port for HTTP server access
USB port
Stacking Features:
IP Stacking
Single IP address management, supporting up to 8 IP units
Hardware Stacking
Single IP address stack management, supporting up to 8 hardware units
Redundant Ring stacking architecture
IPv4 Features:
Static Routing
RIP v1/v2
OSPFv2
BGP
Policy Routing
BFD for OSPF and BGP
IPv6 Features:
ICMPv6
DHCPv6
ACLv6
IPv6 Telnet
IPv6 Neighbor Discovery
Path MTU Discovery
MLD and MLD Snooping
IPv6 Static Routing
RIPng
OSPFv3
BGP4+
Manual Tunnel
ISATAP Tunnel
6-to-4 Tunnel
Multicast Routing Features:
PIM-DM
PIM-SM
PIM-SSM
IGMP v1/v2/v3
Layer 2 Features:
Auto-MDI/MDI-X
IEEE 802.3x flow control
Back-pressure flow control
32K MAC address table
IEEE 802.1Q VLAN
Q-in-Q VLAN
Private VLAN Edge
Protocol-based VLAN
MAC-based VLAN
Link Aggregation
STP, RSTP, MSTP
Port mirroring
G.8032 ERPS
Quality of Service:
8 priority queues
Strict Priority
WRR
IEEE 802.1p CoS/ToS
IPv4/IPv6 DSCP
Port-based WRR
Security:
IEEE 802.1x authentication
RADIUS/TACACS+ authentication
ACL
DHCP Snooping
Dynamic ARP Inspection
IP Source Guard
Management:
IPv4 and IPv6 dual stack management
Console and Telnet CLI
HTTP web management
SNMP v1/v2c/v3
SSHv2, SSLv3, TLSv1.2
RMON
TFTP client
BOOTP and DHCP
Firmware upload/download via HTTP
Reset button
Dual images
DHCP Relay
DHCP Option 82
DHCP Server
NTP
SFP-DDM
Ping and trace route for IPv4 and IPv6
| Copper Ports | 48 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports (ports 1 to 48) | 10G SFP+ Ports | 6 10GBASE-SR/LR SFP+ ports (ports 49 to 54); backward compatible with 1000BASE-SX/LX/BX SFP transceiver |
| MGMT | 1 x 10/100BASE-T RJ45 port | Console | 1 x RJ45-to-DB9 serial port (115200, 8, N, 1) |
| USB | 1 x USB 2.0 | LED Indicator | System: PWR, SYS, MGMT Green; Ports: RJ45 LNK/ACT Green; SFP+ LNK/ACT Green |
| Dimensions (W x D x H) | 440 x 380 x 43.6 mm, 1U height | Weight | 4783g |
| Power Consumption | System on: 20 watts/68.2 BTU max; Full loading: 50.2 watts/171.1 BTU max | Power Requirements | AC 100~240V, 50/60Hz |
| Fan | 2 Smart FAN | ESD / Surge Protection | ESD: 6kV; Surge: 6kV |
| Switch Architecture | Store-and-forward | Switch Capacity | 216Gbps / non-blocking |
| Switch Throughput | 160Mpps | Address Table | 32K MAC address table with auto learning function |
| ARP Table | 1K | Routing Table | 1K |
| VLAN Interface | 1K | IP Interface | 4096 |
| ACL Table | 3K | Routing Entries | 1K |
| Shared Data Buffer | 8MB | Jumbo Frame | 12KB |
| Flow Control | Back pressure for half duplex; IEEE 802.3x pause frame for full duplex | IPv4 IP Routing Protocol | RIP v1/v2, OSPFv2, BGP, Static routing |
| Multicast Routing Protocol | PIM-DM, PIM-SM, PIM-SSM | VRRP | Configure VRRP in interface VLAN; VRRP priority; VRRP standby; VRRP track |
| Routing Features | VRRP, policy routing, load balance through equal-cost routing, BFD for OSPF and BGP | DHCP | DHCP client, DHCP server, default route, DHCP relay |
| IPv6 IP Routing Protocol | RIPng, OSPFv3, VRRPv3, URPF, RA, BGP4+ | IPv6 Routing Features | Manual tunnel, ISATAP tunnel, Configured Tunnel, GRE Tunnel, 6-to-4 tunnel |
| IPv6 Functions | ICMPv6, DHCPv6, ACLv6, IPv6 Telnet, IPv6 Neighbor Discovery, Path MTU Discovery, ND, DNSv6, IPv6 LPM Routing, IPv6 Policy-based Routing (PBR) | Port Configuration | Port disable/enable, flow control disable/enable, bandwidth control on each port, port loopbacks detect |
| Port Status | Displays each port’s speed duplex mode, link status, flow control status and auto negotiation status | VLAN | IEEE 802.1Q tag-based VLAN up to 4K VLAN entries; IEEE 802.1ad Q-in-Q VLAN stacking/tunneling; GVRP; PVE; protocol-based VLAN; MAC-based VLAN; IP subnet VLAN |
| Spanning Tree Protocol | IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP, BPDU protection, root protection | IPv4 IGMP Snooping | IPv4 IGMP v1/v2/v3 snooping, IGMP Fast Leave, IPv4 Querier mode, IGMP Filtering, IGMP Throttling, IGMP Proxy reporting |
| IPv6 MLD Snooping | IPv6 MLD v1/v2 snooping, Multicast VLAN Register (MVR) | Bandwidth Control | Ingress and Egress; at least 64Kbps stream |
| Ring | Supports ITU-T G.8032 ERPS | Link Aggregation | IEEE 802.3ad LACP/static trunk; supports 32 groups with 8 ports per trunk group |
| QoS | 8 priority queues on all switch ports; traffic supervision and shaping; WRR, SP, SP+WRR; policy-based ingress and egress QoS; 802.1p and DSCP priority remark | Traffic Classification | IEEE 802.1p CoS, DSCP, DiffServ, Precedence, TOS, VLAN ID, IP ACL, MAC ACL, Port ACL |
| Access Control List | Supports Standard and Expanded ACL; IP-based, MAC-based, Port-based and Time-based ACL; up to 1K entries | Security | Port isolation, port security, IP + MAC + port binding, L2/L3/L4 ACL filtering, DOS/TCP attack defence, packet suppression, DHCP Snooping, DHCP Option 82, user-level command authority |
| Authentication | IEEE 802.1x port-based network access control; AAA authentication via TACACS+ and IPv4/IPv6 over RADIUS | AAA | TACACS+ and IPv4/IPv6 over RADIUS |
| Network Access Control | IEEE 802.1x port-based network access control | System Configuration | Console and Telnet, Web browser, SNMP v1/v2c |
| Secure Management Interfaces | SSHv2, SSLv3 TLS v1.2 and SNMPv3; maximum 8 SSH and Telnet sessions | System Management | IPv4/IPv6 protocols, IP security inspection, MIB/TRAP, TFTP, FTP, NTP, RMON 1/2/3/9, RADIUS Telnet authentication, COA, CLI, console, Telnet, Security IP safety net, TACACS+, SPAN, RSPAN |
| Stacking Management | IP Stacking and Hardware Stacking; 8 members max.; 2 software-defined ports as Stacking Up and Down interfaces; identical firmware required | Event Management | Supports syslog server for IPv4 and IPv6 |
| SNMP MIBs | RFC 1066, 1213, 1215, 1757, 1354, 1493, 1643, 1907, 2011, 2012, 2013, 2096, 2233, 2452, 2454, 2465, 2466, 2573, 2574, 2674 | Regulatory Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3, 802.3u, 802.3z, 802.3ab, 802.3ae, 802.3x, 802.3ad, 802.1D, 802.1w, 802.1s, 802.1p, 802.1Q, 802.1X, 802.1ab | RFC Standards | RFC 768, 783, 791, 792, 2068, 1112, 2236, 3376, 2710, 3810, 2328, 1058, 2453, 5176 |
| Operating Environment | Temperature: 0 ~ 50°C; Relative Humidity: 10 ~ 85% non-condensing | Storage Environment | Temperature: -40 ~ 80°C; Relative Humidity: 5 ~ 95% non-condensing |
| Description | Downloads |
|---|---|
| Datasheet | Download |
Compare picture quality, touchscreen performance, software and connectivity with guidance from a commercial display specialist.
Access project pricing, volume discounts, product sourcing support and faster commercial quotations for your client projects.
Access education pricing, purchase-order support, installation services and account management for schools, academies, colleges, universities, NHS organisations, councils and government bodies.
