-
WyreStorm 35m 4K HDBaseT™ Receiver | RX-35-POH
Compact Class B HDBaseT receiver supporting 4K HDR transmissions up to 35 meters from a compatible HDBaseT matrix or presentation switcher. 2-way PoH allows the RX-35-POH to power over category cable from a PoH matrix or switcher and also allows for the receiver to power in-wall HDBaseT transmitters.

CLASS B HDBASET™
Small in size but not in specification, the RX-35-POH is no different to the modern H2 family of products, supporting pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 35m/115ft or 1080p to 35m/115ft.
CONTROL OPTIONS
Supports 3 methods of control pass-through. Being a pure HDBaseT™ device, the RX-35-POH can handle bi-directional IR, RS-232 and even CEC routing when used as part of a compatible WyreStorm matrix or extender system.
POH
The RX-35-POH can be powered by a PoH compatible matrix or presentation switcher meaning one less thing to think about when specifying & installing a WyreStorm system.
FULLY COMPLIANT WITH HDCP 2.2 ENCRYPTION
As with all of our HDBaseT Receivers, remaining relevant & legal is key to their operation. The RX-35-POH is compliant with the strict anti-piracy algorithms that prevent the unauthorized distribution of content, meaning a trouble-free installation.
Product Features
Receives 4K UHD HDBaseT transmissions up to 35m/115ft
Compatible with 4K HDR source content
Compatible with HDCP 2.2 protected content
2-way PoH enabled for convenient PSU-free installation
RS-232 and IR passthrough for control of peripheral equipment
-
Category |
Specification |
Audio and Video |
|
Inputs |
1x HDBaseT In 8-pin RJ-45 female |
Outputs |
1x HDMI 19-pin type A |
Output Video Encoding |
HDBaseT Class B |
Encoding Data Rate |
9.2Gbps |
End to End Latency (Max) |
10μs (micro seconds) |
Audio Formats |
2ch PCM |
Video Resolutions (Max) |
1920x1080p @60Hz 16bit, 3840x2160p @60Hz 10bit 4:2:0 HDR, 4096x2160p @60Hz 8bit 4:2:0 |
HDMI Cable Length |
7m/23ft |
Cat6 Cable Length |
70m/230ft (Max), 35m/115ft (Max) |
Cat6a/7 Cable Length |
70m/230ft (Max), 35m/115ft (Max) |
Note |
WyreStorm recommends using shielded category cable to minimize signal noise and interference |
Supported Standards |
DCI |
Maximum Pixel Clock |
HDMI: 297MHz |
Communication and Control |
|
HDMI |
HDCP 2.2 |
HDBaseT |
HDCP 2.2 |
IR |
1x IR TX 3.5mm (1/8in) Mono |
RS-232 |
1x 3-pin Phoenix Connector |
Power |
|
Power Supply |
12V DC (Optional) |
PoH |
2-way |
Max Power Consumption |
7.2W |
Environmental |
|
Operating Temperature |
32°F ~ 113°F (0°C ~ 45°C), 10% ~ 90%, non-condensing |
Storage Temperature |
-4°F to ~ 158°F (-20°C ~ +70°C), 10% ~ 90%, non-condensing |
Maximum BTU |
24.6 BTU/hr |
Dimensions & Weight |
|
Rack Units/Wall Box |
<1U |
Height |
21mm/0.82in |
Width |
140mm/5.5in |
Depth |
80mm/3.14in |
Weight |
0.29kg/0.65lbs |
Regulatory |
|
Safety and Emission |
CE |
-